Huff And Puff Victoria : Respiratory Medical Equipment & Supplies
Huff and Puff Victoria - Respiratory Medical Equipment & Supplies
|
|
If you do any advertising online,
AdMinder
will increase the ad response and help you to double your sales and profits.
|
Respiratory Medical Equipment & Supplies
Note:
Huff and Puff Victoria do not buy, sell or hire any medical equipment or supplies,
please contact listed suppliers direct for any query.
Domiciliary Oxygen
Oxygen Concentrator Sales, Service and Repair
|
|
| Product | Medical Oxygen Flowmeter |
Material # | CW515800 |
List Price | Ring 1800 050 999 |
Description |
The Medical Oxygen Flowmeter delivers an accurate and safe prescribed flow of oxygen to the end user from the main oxygen source. |
Benefits
| Precision manufacturing gives an accuracy within +- 5%. Safety is insured with the gas colour coded control knobs and indexed sleeves, a flow limiting output orifice for protecting the patient from excessive flows and the pressure relieving feature of the outer shroud prevents failure due to excessive gas pressures. |
Features: |
Designed and manufactured in Australia to meet Australian Standards· Clearly marked lines enhance accurate centre-of-ball reading· The dual taper of the needle valve prevents damage to the seat and eventual leaks.· The flowtube design provides clear readability with large bold print and 180 deg visibility· The shroud and flowtube are made of high impact resistant polycarbonate material to provide durability |
Technical Specifications |
Inlet Pressure: 400 kpa· Outlet Fitting: Tapered nipple· Inlet Fitting: Sleeve Indexed System - Australian Standard· Flow Rate: 0 to 15 lpm· Weight: 300 grams |
| Product |
Medical Oxygen Regulator and Flowmeter - Pin Indexed Yoke Inlet |
Material # |
WT2821 |
List Price |
Ring 1800 050 999 |
Description |
This regulator is designed to reduce cylinder fill pressure to the Australian Standard safe acceptable outlet pressure on the portable pin indexed cylinders. |
Benefits
| Being compact and lightweight, it provides the user with a portable combined regulator and flowmeter. |
Features: |
- Designed and manufactured to meet all International safety standards and CGA Ignition Standards
- A sintered bronze inlet filter reduces the chances of any foreign material coming in contact with the high pressure oxygen
- 1 Year Warranty
- Safety valve protects staff and patients from high pressure failures
- Click in flow controls
- Needle valve design for continuous flow
- 40 mm diameter rubber boot protected gauge
|
Technical Specifications |
·
- Complies to Australian Standards AS1349
- Inlet Pressure: 1000 kpa to 20,000 kpa
- Outlet Pressure: 400kpa
- Outlet Fitting: Tapered Nipple
- Inlet Fitting: Pin Indexed CGA540 ( Size BL, C & CFR Cylinders)
- Flow Rate: 0 to 8 lpm in 1 Litre Increments
- Weight: 400 grams
|
|
Regulator Type 10 Inlet
Material # |
CW518800 |
List Price |
Ring 1800 050 999 |
Description |
To reduce cylinder fill pressure to the Australian Standard safe acceptable outlet pressure, the series O regulator has been the industry standard for regulators in Australia for many years. |
Benefits
| Simple to use and equally simple in design, the series O is a single stage unit with a minimum number of parts that means lower maintenance for you. With its large diameter diaphragm, the series O gives the performance normally only found in double stage regulators. In addition, it also can power a number of devices simultaneously. |
Features: |
- Designed and manufactured in Australia to meet Australian Standards·
- Triple filters reduce the chances of any foreign material coming in contact with the high pressure oxygen·
- No tools required to routinely disconnect the regulator from the cylinder valve·
- A full range of O series regulators are available for specific medical gases·
- 3 Year Warranty·
- Safety Valve protects staff and patients from high pressure failures·
- Tamper resistant design, ensuring only qualified service personnel can access the regulator
|
Technical Specifications |
- Complies to Australian Standards AS1349·
- Inlet Pressure: 1,000kpa to 20,000kpa;
- Outlet Pressure: 400kpa·
- Outlet Fitting: Sleeve Indexed System - Australian Standard·
- Inlet Fitting: Type 10 Handwheel ( Size D, E & G Cylinders)·
- High Flow Rate - greater than 200 lpm·
- Weight: 920 grams
|
| Product |
Medical Oxygen Concentrator |
Material # |
NPB5901 |
List Price |
Ring 1800 050 999 |
Description |
The Oxygen Concentrator delivers oxygen from extracting nitrogen from room air via molecular sieves. Oxygen is delivered at between 90% to 95% at a flow rate of 2lpm, (the percentage can fall as low as 85% at 5lpm).
The 590I comes with an Oxygen Concentrator Indicator to warn against decreasing oxygen concentration levels. |
Benefits
| A reliable continuous supply of oxygen can be delivered from a unit that offers a 5 year warranty. |
Features: |
- An effective four stage filtration system
- 5 Year Warranty
- Superior cooling system allowing longer life of the individual components
- Low pressure and power failure alarms
- OCI low oxygen concentration indicator is a standard feature
- Lifetime sieve bed warranty
- Full parts and back up service available Australia wide
- Quiet operation, less than 55dba at 1 meter
|
Technical Specifications |
- Complies to Australian Standards AS3200.1 and ISO 8359
- Outlet Pressure: 5 psi
- Outlet Fitting: Tapered Nipple·
- Flow Rate: 0 to 5 lpm in ¼ Litre Increments
- Weight: 30.4 kgs
- Size: 64.5 cm x 31.75 cm x 41.9 cm·
- Electrical: 240 Volts, 1.7 A, 50 Hz, 380 Watts
|
For further information call 1800 050 999, fax 1800 624 149
or email oxycare@spr.gases.boc.com |
BOC Gases - Medical Gases - Canada
Huff and Puff Victoria Inc.
PO Box 184
Watsonia
3087, Melbourne, Australia.
Secretary/Webmaster:
Max. S. Beach
Phone: 0011 61 (0)3 9435 5731
FAX : 0011 61 (0)3 9444 7540
Email: huffpuffvic@optusnet.com.au
Previous update: 30 October 2002
Last updated: 13 January 2003
© All Rights Reserved :
Max.S. Beach 1999 : 2003
|
|
